(204) 414-1877 | Mon-Fri: 8:00 am-4:30 pm | Sat-Sun: 8:00 am-4:30 pm

Your home water heater is one of the most critical parts of your home. Whether it is showering, doing laundry or washing dishes, it is virtually impossible to get all these functions done without an adequate supply of warm water. This is why if your water heater starts having issues, you are likely to rush to your local Winnipeg plumber to get the issue sorted on priority and get access to heated water. Here are the most common water heater issues that you may experience and some tips on how to deal with them:

No hot water

This one is pretty obvious. If your water heater is not doing the one job that it is designated to do (namely heating water), you will want to call an expert pronto. But before doing so, you can check if your pilot light is on. If it is not on, you can try to turn it on to see if it was accidentally switched off. If you still notice that you are not getting hot water, it may be a bigger issue than you anticipated and you should immediately call the best local plumber in Winnipeg for help.

insufficient Hot Water

Imagine you are just getting into a hot shower and suddenly the water turns cold. Nightmarish as it sounds, running out of hot water can be pretty frustrating. There are many issues why your water heater is not producing enough hot water. Firstly, it is possible that your heater’s thermostat has gone kaput. Another reason is maybe your heater is too small in size for producing an ample amount of hot water. You may want to think about buying a bigger water heater or even considering a tankless water heater. Tankless water heaters don’t run out of hot water quickly and are totally worth the investment, especially if you often face this issue.

Water temperature is on extreme

It may be possible that your heater’s thermostat may be set too high or too low. Try to adjust the temperature and get the desired outcome. You may have to do it several times before you finally find a suitable temperature that you can work with. If you notice that this doesn’t solve your problem either, you may have a faulty thermostat. Get a new thermostat or a heating element to solve this problem.

Another common issue is a sediment deposition in your tank. To rectify this, drain out the water from your water heater and get it cleaned from professional plumbers or water tank cleaners. After refilling the water post-cleaning, check if the issue has been solved. Your local Winnipeg plumbers can help you do this assessment.

Apart from the above issues, there are many other underlying problems that can cause your water heater to malfunction. It is best to call a reliable Plumbing service from Winnipeg like Aslan Plumbing to help you identify problems related to heating tanks, sewer, drain, etc. so that they can be handled quickly and efficiently by their team of licensed and experienced plumbers.